| APPLICATION |
FEATURES |
TECHNICAL DATA |
PRODUCT |
RITE-LOK™ TL43
Medium strength rapid curing threadlocker for vibration proofing screws, nuts and bolts and other threaded parts |
- Suitable for most threadlocking applications
- Seals and prevents corrosion
- Dismantle using normal tools
- Oil tolerant
|
- Torque Break/Prevail (ISO10964): 19/10 Nm
- Viscosity: 14,000cPs
- Colour: Blue
- Max gap fill: 0.30mm
|
 |
TL43
Nutlock |
RITE-LOK™ TL70
High strength threadlocker for nuts, bolts and heavy duty fasteners |
- High Torque strength
- Prevents leakage and corrosion
- Locks solid - for permanent applications
|
- Torque Break/Prevail (ISO10964): 29/33 Nm
- Viscosity: 500 cPs
- Colour: Green
- Max gap fill: 0.20mm
|
 |
TL70
Permanent Studlock |
RITE-LOK™ RT01
High strength, low viscosity retainer for close fitting parts |
- Low viscosity
- High strength
- Allows even stress distribution in the joint
|
- Torque Break/Prevail (ISO10964): 32/34 Nm
- Viscosity: 125cPs
- Max gap fill: 0.20mm
|
 |
RT01
Shaft Fit |
RITE-LOK™ RT41
Low viscosity retainer for the assembly of bearings. The controlled medium strength allows disassembly for servicing and bearing replacement. |
- Low viscosity to allow penetration into the joint during assembly
- Lubricates during assembly
- Prevents corrosion of assembled parts.
|
- Torque Break/Prevail (ISO10964): 15/10 Nm
- Viscosity: 500 cPs
- Max gap fill: 0.20mm
|
 |
RT41
Bearing Fit |
RITE-LOK™ RT38
Maximum strength retainer. For permanent assembly sleeves of pulleys and gears on shafts |
- Ultimate strength
- Vibration resistant
- Eliminates fretting and corrosion
- Improves stress distribution
|
- Torque Break/Prevail (ISO10964): 30/32 Nm
- Viscosity: 2500 cPs
- Max gap fill: 0.25mm
|
 |
RT38
Maximum Strength Retainer |
RITE-LOK™ PS65
Pipe Sealant for coarse threads. Lubricates, seals and locks threads |
- Withstands temps up to 150°C
- Fast curing paste
- Dismantle using normal tools
|
- Torque Break/Prevail (ISO10964): 3.5/1.5 Nm
- Viscosity: 300000 cPs
- Max gap fill: 0.50mm
|
 |
PS65
Pipe Sealant |
RITE-LOK™ HP42
Hydraulic sealant for fine threads |
- Rapid high pressure seal
- Use on small or medium pipes
- Medium viscosity
- Dismantle using normal tools
|
- Torque Break/Prevail (ISO10964): 13/10 Nm
- Viscosity: 500 cPs
- Colour: Brown
- Max gap fill: 0.20mm
|
 |
HP42
High Pressure Sealant |
RITE-LOK™ GM74
Multi-purpose gasket maker |
- Replaces pre-cut gaskets of any shape or size
- Does not shrink or relax
- Thixotropic formulation
- Fills scratches and gouges
|
- Viscosity: 80000 cPs
- Max gap fill: 0.35mm
- Colour: Orange
|
 |
GM74
Gasketmaker |